Snapper RTX102 Manual Do Utilizador página 109

ES STATEMENT OF COMPLIANCE (original)
pursuant to: EP and Council Directive No. 2006/42/EC
EP and Council Directive No. 2014/30/EC
EP and Council Directive No. 2000/14/EC
A. We: Seco Industries, s.r.o., Jungmannova 11, Valdické Předměstí, 506 01 Jičín
ID No.: 05391423
B. Mechanical equipment
- name: Riding mower
- model: UJ 122 (RTX122-2692057-00)
- serial number: 000000000-999999999
Description:
The UJ 122 (RTX122) is a four-wheel self propelled mower with Briggs & Stratton motors 8270 PXi (44U8). The power drive
from the engine is transferred by V-Belts to the travel drive transmission on the rear axle with a continuously variable gear and
through an electromagnetic clutch to the mowing deck. The mowing deck is a twin-blade assembly with a vertical axis of rotation
and a coverage width of 122 cm that is driven by a double-sided cogged belt. The grass clippings are guided through a chute to
the grass catcher or directed to the ground with the deflector. Instead of collection, the mower may perform mulching by blocking
the ejection chute and using two mulching blades. The mower may be in a configuration of 4x2 or 4x4 with a front drive axis.
C. Legislation forming the basis for assessment of compliance:
ČSN EN ISO 12100, ČSN EN ISO 5395-1,3, ČSN EN ISO 14982:2009
D. Assessment of compliance was performed according to the designated procedure in:
- EP and Council Directive No. 2006/42/EC, Annex VIII (eqv.Annex no. 8, NV No. 176/2008 Coll.)
- EP and Council Directive No. 2014/30/EC, Annex II (eqv.Annex no. 2, NV No. 117/2016 Coll.)
- EP and Council Directive No. 2000/14/EC, Annex VI (eqv.Annex no. 5, NV No. 9/2002 Coll.)
E. Assessment of compliance performed by:
Státní zkušebna strojů a.s. (SZS, a.s.)
Třanovského 622/11, 163 04 Prague 6 Řepy, Czech Republic
F. We confirm that:
- this mechanical equipment meets all respective provisions of the aforementioned directives (NV)
- measures have been taken to ensure the compliance of all products introduced to the market with the technical documentation
and the requirements contained in technical regulations.
- guaranteed emission level of acoustic power L
Measured mean values of acoustic power depending on the engine used:
ENGINE
BRIGGS & STRATTON 8270PXI (44U8)
Technical Documentation in the scope pursuant to annex VII for the Directive 2006/42/EC a pursuant to Directive 2000/14/EC is kept
at the place of business of the manufacturer:
SECO Industries, s.r.o.
Jungmannova 11
Valdické Předměstí
506 01 Jičín
In Jičín, 18.10.2023
Therefore, some technical differences in terminology may appear in this manual when compared with the actual product. No claims can be deduced
from this. Print, duplication, publication and translation (even in part) must not be performed without the written consent of Seco Industries, s.r.o. The
manufacturer reserves the right to change technical parameters of the product, without prior customer notification.
(Government directive NV 176/2008 Coll.)
(Government directive NV 117/2016 Coll.)
(Government directive NV 9/2002 Coll.)
issue the following statement:
Státní zkušebna strojů a.s. (SZS, a.s.), NB 1016
Třanovského 622/11
163 04 Prague 6 Řepy, Czech Republic
is 105 dB(A)
WA
Speed (min
2800
Ing. Aleš Housa
Mechanical Engineering Division Director
109
) Measured value of ac.power [dB(A)]
-1
104