Publicidad
Idiomas disponibles
Idiomas disponibles
5. Instant power failure state processing:
There are many reasons for instant power failure, mainly may be poor contact or
brake power switch failure. On the one hand, the user can check the after-sales
service, on the other hand, the user can self-check the following points.
A. Check whether the fuse is burned out, check whether the battery connection is
loose, and check whether the battery connection main line is loose.
B. Check whether the brake power switch is reset, whether there is any foreign
body stuck, please remove and the brake reset.
C. Check whether the brake power off switch is short circuit after rain. If there is an
available hot fan to dry the "water" in the switch, the power off switch can return to
work.
6. Speed car status processing:
If the electric car appears, please close the door lock for further inspection, or send
the maintenance department for inspection and treatment.
Assembly instructions
step1, Rear Mirror Installation
As shown in FIG. 1, align the rear view mirror at the position shown by the arrow
and installation. Tighten the screws in FIG. 2
- 11 -
Publicidad
