VEVOR BL350-19 Manual De Instrucciones página 8

Manipulative methods and considerations
1. Description of the manipulation section:
The manipulated part is shown in Figure
1, left brake / 2, far and far light switch / 3, power display / 4, speed display / 5,
right brake / 6, knob / 7 headlight switch / 8, electric door lock / 9, horn switch / 10,
turn signal switch.
1.1 Left brake handle (1): it is the rear hub brake handle; the power switch on the
brake wheel closes, and the brake light is on.
1.2 Right brake handle (5): It is the front wheel brake handle and the front wheel
brake; close the power switch until the motor stops working, and the brake light is
on. Note: in the emergency brake, the front and rear brake should be used, do not
only use the front wheel brake, otherwise prone to vehicle side slip.
1.3 Headlight switch (7) and near-remote light switch (2): When driving at night,
first dial the headlight switch to the first gear position. At this time, the instrument
light is on and the taillight is on; dial the second gear, the headlights and the near
remote light can work; Note: for safety reasons, when driving at night, turn the
remote light back to the near light.
1.4 Turn signal switch (10): the signal indicator light used to turn left or right and
change the direction of the road. The middle is the closed position, dial the left turn
left, dial the right turn right. When the turn signal is turned on, the corresponding
turn indicator light will be displayed on the instrument, and the buzzer will make a
"beep" sound.
- 7 -