Descargar Imprimir esta página

Kaco blueplanet gridsave 92.0 TL3-S Guía Rápida página 133

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
1
General information
WARNING
Danger due to improper handling of the device!
Read and observe the comprehensive manual.
NOTE
This quick guide will assist you in handling the device. A mobile end device with an Ethernet port is abso-
lutely necessary for the setup process. This quick guide does not replace the description in the comprehen-
sive manual under
2
Safety
The quick guide that is provided is a constituent part of the device.
F Read and observe the quick guide and keep it accessible at all times.
2.1
Intended use
The device has been developed for use with a battery system. The device converts the DC voltage provided by the bat-
tery into AC voltage, so that it can be fed into the grid or the battery can be charged. The device is built using state-of-
the-art technology and in accordance with the recognised safety rules.
The device is intended for indoor and outdoor applications and may only be used in countries for which it has been ap-
proved or for which it has been released by KACO new energy and the grid operator.
Nevertheless, improper use may cause lethal hazards for the operator or third parties, or may result in damage to the
device and other property. This relates to the following operation and connection:
ž
Operate the device only with a permanent connection to the public power grid.
ž
The requirements of the grid operator must be met for grid connection to take place. The permission of the rele-
vant authorities may also be required in order to secure authorisation to connection to the grid.
ž
The enclosed documentation is an integral part of the product. The documentation must be read, observed and
stored in a place which is freely accessible at all times.
ž
Operation in accordance with the appended EU Declaration of Conformity envisages up to 2 bidirectional feed-in
inverters per battery.
ž
Approval from KACO new energy is required for a parallel DC circuit with more than 2 bidirectional feed-in invert-
ers.
Any other or additional use is not considered proper or intended use and can lead to an annulment of the product
guarantee. This includes:
ž
Mobile use
ž
Use in rooms where there is a risk of explosion
ž
Use of the device in direct sunlight, rain or a storm or other harsh environmental conditions
ž
Use in an outdoor area that does not meet the environmental conditions set down in the Environmental data
ž
Operation of devices with an inconsistent performance in DC parallel operation
ž
Operation of devices with an inconsistent firmware version in DC parallel operation
ž
Operation outside the specifications intended by the manufacturer
ž
Overvoltage of over 1,500V on the DC connection
ž
Modifying the device
ž
Off-grid operation.
2.2
Improper use
Any other or additional use is not considered proper or intended use and can lead to an annulment of the product
guarantee. This includes:
ž
Mobile use
ž
Use in rooms where there is a risk of explosion
ž
Use of the device in direct sunlight, rain or a storm or other harsh environmental conditions
ž
Use in an outdoor area that does not meet the environmental conditions set down in the Environmental data
ž
Operation of devices with an inconsistent performance in DC parallel operation
ž
Operation of devices with an inconsistent firmware version in DC parallel operation
ž
Operation outside the specifications intended by the manufacturer
ž
Overvoltage of over 1,500V on the DC connection
1
WARNING! The device is not intended for use in residential areas and cannot ensure adequate protection of
radio reception in such environments.
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137 TL3-S
www.kaco-newenergy.com/de/downloads
1
Side 133

Publicidad

loading

Este manual también es adecuado para:

Blueplanet gridsave 110 tl3-sBlueplanet gridsave 137 tl3-s