Descargar Imprimir esta página

cecotec BOLERO HEXA AF314500 GLASS BLACK A Manual De Instrucciones página 56

Horno integrable convencional

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
ENGLISH
To install the power cable, proceed as follows
-
Remove the cable clamp screw and the three contact screws.
-
Fix the wires under the screw heads using the following colour scheme: Blue (N) Brown
(L) Yellow Green.
-
Secure the power cable with the cable clamp and close the terminal board cover.
Connecting the power cable to the mains
-
Install a standard plug socket corresponding to the load indicated on the rating plate.
When connecting the cable directly to the mains, install an omnipolar circuit breaker with
a minimum contact opening of 3 mm between the appliance and the mains. The omnipolar
circuit breaker must be sized according to the load and comply with the applicable
regulations (the earth cable must not be interrupted by the circuit breaker).
-
The power supply cable must be routed so that it does not reach a temperature above 50
℃ above ambient temperature and must be protected by insulation with an appropriate
rating. Before making the connection, check that:
-
The electrical safety of this appliance can only be guaranteed if the oven is correctly and
effectively earthed in accordance with electrical safety regulations. Always make sure
that the ground connection is effective; if in doubt, call a qualified technician to check the
system. The manufacturer declines all liability for damage resulting from an ungrounded
system.
-
Before connecting the appliance to the mains, check that the specifications indicated on
the rating plate (on the appliance and/or on the packaging) correspond to those of the
mains supply at home.
-
Check that the electrical capacity of the installation and the sockets can withstand the
maximum power of the appliance. If in doubt, contact a qualified technician.
-
If the socket and plug of the appliance are not compatible, ask a qualified technician to
replace the socket with a suitable model. The latter, in particular, will also have to ensure
that the cross-section of the socket cables is adequate for the power used by the appliance.
The use of adapters, multiple sockets and/or extensions is not recommended. If their use
cannot be avoided, remember to use only single or multiple adapters and extension cords
that comply with current safety regulations. In these cases, never exceed the maximum
current capacity indicated on the single adapter or extension lead and the maximum
power indicated on the multiple adapter. The plug and socket shall be easily accessible.
4. OPERATION
Use the function knob to choose the desired function. Turn the knob to the cero position to
switch off the oven.
56
BOLERO HEXA AF314500 GLASS BLACK A / MATT A

Publicidad

loading

Este manual también es adecuado para:

Bolero hexa af314500 matt a0132902826