Descargar Imprimir esta página

Greencut GTC300XE Guía De Mantenimiento página 60

Ocultar thumbs Ver también para GTC300XE:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
HELLO!
Thank you for choosing this GREENCUT product. We are sure that you will appreciate its quality and that it will meet
your needs for a long period of time.
You can contact our Official Technical Service for questions about assembly, use, maintenance, identification and
troubleshooting and for the purchase of spare parts and/or accessories.
Attention: Read this entire owner's manual thoroughly before attempting to assemble this machine. Follow all
instructions on the machine before putting it into operation. Become thoroughly familiar with the controls and
the correct use of the machine before starting it up. Keep this manual in a safe place for future reference and for
ordering spare parts. The manufacturer is not liable for accidents and damage caused to the user, third parties and
objects as a result of disregarding the contents of this manual. This product is not intended for professional use. If
you sell this product, remember to hand over this manual to the new owner.
PRECAUTIONS FOR USE
The following symbols and signal words are intended to explain the risks and information related to this product.
All information contained in this manual is relevant to your safety and the safety of your environment. If you are in
any doubt about the information contained in this manual, please consult a professional or contact an Authorised
Service Centre. The following information on hazards and precautions includes the most likely situations that may
arise during the use of this machine.
Attention, danger!
Read this manual carefully before starting
the machine.
Wear a safety helmet.
Wear eye and hearing protection.
Wear a mask to protect yourself from dust,
steam, and other toxic gases.
Wear non-slip safety gloves.
Wear leg protection and non-slip safety
boots with steel guards.
Very hot surface! Do not touch due to risk
of burns.
Danger, deadly gases! Do not use this
machine in enclosed or poorly ventilated
areas.
Flammable fuel! Risk of fire or explosion.
Do not smoke or allow flames near the
fuel or machine.
60
EN - GTC300XE
Check for fuel leaks.
Do not use this machine on slopes with
more than a 15° gradient.
People who are not properly protected
should be within safe distance.
Keep children away from the machine.
Danger of ejection of materials. Be careful
with objects that may be touched and
projected by the machine.
Danger! Risk of finger amputation. Keep
your hands and feet away from the cutting
tool.
Do not move your hands or any other part
of your body close to the moving parts of
the machine.
Before servicing or repairing the machine,
switch the machine off and disconnect the
spark plug.
Guaranteed sound power level XX Lwa,
dB(A).
Dispose of your device in an
environmentally friendly manner. Do not
dispose of in household waste containers.
Complies with CE directives.

Publicidad

loading