Baumer HI SPEED II B0111-100 Manual De Mantenimiento página 45

The HI SPEED II line sterilizers have functions designed for maintenance procedures by the maintenance team.
The main functions are described below:
15.1 Manual Operation
The product is designed to operate fully automatically. To assist maintenance and check the correct operation of
the drives, the product can be operated manually, through the access password specified by the supervisor.
(Obs.: User registration information and access password are contained in the Instructions for Use).
Maintenance Manual
Steam Sterilizer
HI SPEED II
Calibration and Maintenance Routines
In the start menu of cycle enter the option "Enter
settings".
The menus are released for access, select the menu
"Maintenance and calibration".
For
OPERATION" button. The menu of manual operation
can only be accessed by users who have the level
enabled for the operation. The command will prompt
you to enter a user name and password. Enter the
password using the numeric keypad. Press the
"ENTER" key (key to confirm data entry) to finish.
Obs.:
password are contained in the Instructions for Use.
The sterilizer will be enabled for manual operation. The
activation of the systems can be done individually or
simultaneously.
To navigate on the manual operation screens, select
the next button.
Code: MM.01.09.0003
Version / Revision: 3.001
Page: 45 of 81
manual operation, press
User registration information
the "MANUAL
and access