Kratki PATIO Manual Del Usuario página 49

Estufa exterior de gas

Ocultar thumbs Ver también para PATIO:

Idiomas disponibles

The ON/OFF knob is in the ON position.

The Temperature Knob used to adjust the flame is turned in the counter clockwise direction. Gas flows

through the ON/OFF low flame valve (item 3) and the high flame modulation valve (item 4).

Fig. 17. Schematic overview of starting the device and adjusting the flame.

Any maintenance work should be carried out on a cooled down device with the gas supply cut

off and the power supply disconnected.

Maintenance of the heater must only be performed by a qualified service technician.

• The device is to be periodically checked at least once a month during each cylinder replacement.

• Cleaning should be carried out regularly or as the dust or dirt appears on the device.

• Glasses with cracks and scratches should be replaced immediately.

• It is forbidden to make any changes to the structure of the device.

• The heater cannot be cleaned using corrosive agents.

• When replacing individual components, only use original parts available at the manufacturer.