Balluff BTL AK5A00-0930-C11WH120-000C51-001 Manual De Instrucciones página 29

BTL AK _ A00- _ _ _ _ -C11WH120-000C51-001
Magnetostrictive Linear Position Sensor – Rod Style
1
About this guide
1.1 Validity
This guide provides all necessary information for the safe
use of the BTL magnetostrictive linear position sensor with
CANopen interface.
It applies to the following models ( see Type code on
page 22):
– BTL AK5A00-0930-C11WH120-000C51-001
– BTL AK3A00-1230-C11WH120-000C51-001
– BTL AK7A00-1830-C11WH120-000C51-001
Read this guide and the other applicable documents
completely before installing and operating the product.
Original user's guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2024, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the rights of reproduction, distribution,
processing and translation.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3 Symbols and conventions
Individual action instructions are indicated by a preceding
triangle.
► Instruction
Action sequences are numbered:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
www.balluff.com
1.4 Explanation of the warnings
Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could damage or destroy the
product.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious injury.
1.5 Technical terms and abbreviations used
Baud rate Data transmission rate on the CAN bus
CAN Controller Area Network
CiA CAN in Automation (CiA) International Users
and Manufacturers Group e.V.
FMM Flexible Magnet Mode
n. a. Not available
Node ID Node number for device-specific identification
PDO Process data object
SDO Service data object
english 5