Balluff BTL AK5A00-0930-C11WH120-000C51-001 Manual De Instrucciones página 32

BTL AK _ A00- _ _ _ _ -C11WH120-000C51-001
Magnetostrictive Linear Position Sensor – Rod Style
4
Product description
Ø
Contact
surface
Fig. 4-1: Dimensions, design and function
4.1 Construction
Electrical connection: The electrical connection is made
via a triple connector (see Type code on page 22).
Connection housing: Housing with sockets.
Sensor housing: Housing with evaluation electronics (at
plug-in flange and rod).
Fastening: See chapter Installation and connection on
page 10.
There is an additional thread at the end of the rod to
support large measuring lengths.
Magnet: Defines the position to be measured on the
waveguide. Magnets must be ordered separately (see
Accessories on page 21).
Measuring length: Defines the travel/length range
available.
8 english
Measuring
length
51
2)
Magnet
3)
L = Cable length (see Type code on page 22)
1)
2) Unusable area
Not included in scope of delivery
3)
Connection
housing
Sensor housing
63.5
2)
Female thread
M4×4/6 deep