9. Remove the cleaning accessory, and wash the portafilter
and the filter under running water.
10. Attach the portafilter again and run a rinse cycle by press-
ing the OK button: it is advisable to place a container under
the portafilter.
11. Once the rinse has been completed, the machine is ready
for use.
12. Remove and empty the drip tray.
13. EXPLANATION OF INDICATORS
INDICATORS
All lights blink briefly
permanently alight
permanently alight (white)
•
1x - 2x indicators: the number of cups
must be selected
•
light: indicates the selected coffee
temperature
•
indicator: indicates the ma-
chine is ready to deliver hot water
•
Hot drink indicator: indicates the drink
selected
permanently alight (blue)
•
1x - 2x indicators: the number of cups
must be selected
•
indicator: indicates the ma-
chine is ready to deliver hot water
•
Cold drink indicator: indicates the
drink selected
permanently alight
blinking
permanently alight
Please note:
•
•
•
EXPLANATION OF INDICATORS
Turning the machine on
The machine has been turned on for the
first time and the water circuit must be
filled
The machine is ready to deliver hot
drinks
The machine is ready to deliver cold
drinks
The beans hopper(A2) is empty
The grinding function has been select-
ed, but the beans hopper(A2) is empty
There is not enough water in the tank
(A15) or the tank is not correctly in place
14
The cleaning cycle can be started up at any time (even if the
relative indicator is not yet on).
Should the cleaning cycle be started by mistake, press the
button and hold for 10 seconds; the rinse cannot be
stopped.
After 30 seconds without a button being pressed, the ma-
chine exits the cleaning cycle automatically.
OPERATION
Self-diagnosis
Proceed as indicated in section [manca tag]
"3. Setting up the machine"
Set up the machine and proceed with prepa-
ration of the drink
Set up the machine and proceed with prepa-
ration of the drink
Fill the beans hopper
Fill the beans hopper
Fill the tank with water, or remove the tank
and reposition it correctly
→