Forest-Master FM16D Manual Del Usuario página 32

6
5 5
1 1
32
6
5. Attach the short 430mm rear legs(1) to the rear
leg mount of the log splitter. The end of the leg
that has the bolt hole furthest from the end should
be inserted into the mount. Secure with an M8x35
bolt (5) and M8 nut (6).
6. Slide a leg clamp(11) onto each rear leg and
secure by tightening the M8 bolt. The leg should
be slid through the clamp tube with just a single
nut welded on.
7. Attach an axle bar and wheel assembly to the
rear legs using 2 M8 x35 bolts(5) and 2 M8 nuts
(6). Note that bolts should be inserted through the
larger holes in the sockets on top of the axle bar.
FM16 (Models D & TW)