Forest-Master FM16D Manual Del Usuario página 5

Symbol on
UNDERSTAND YOUR LOG SPLITTER: Read and understand the owner's manual and labels
the machine
affixed to the log splitter. Learn its application and limitations as well as the specific
potential hazards peculiar to it.
DRUGS, ALCOHOL AND MEDICATION: Do not operate the log splitter while under the
influence of drugs, alcohol, or any medication that could affect your ability to use it properly.
AVOID DANGEROUS CONDITIONS: Use the log splitter on the ground, on the stand
supplied or one of the stands available as accessories. Ensure the stand, if used, is securely
assembled.
Keep your work area clean and well lit. Cluttered areas invite injuries. Do not use the log
splitter in wet or damp areas or expose it to rain. Do not use it in areas where fumes from
paint, solvents or flammable liquids pose a potential hazard.
INSPECT YOUR LOG SPLITTER: Check your log splitter before turning it on. Keep guards
in place and in working order. Form a habit of checking to see that keys and adjusting
wrenches are removed from tool area before turning it on. Replace damaged, missing or
failed parts before using it.
DRESS PROPERLY: Do not wear loose clothing, gloves, neckties or jewellery (rings, wrist
watches). They can be caught in moving parts.
Protective electrically non conductive gloves and non-skid footwear are recommended when
working. Wear protective hair covering to contain long hair, preventing it from getting
caught in machinery.
PROTECT YOUR EYES AND FACE: Any log splitter may throw foreign objects into the eyes.
This can cause permanent eye damage. Always wear safety goggles. Everyday eyeglasses
have only impact resistant lenses. They are not safety glasses.
Stand behind and to the right of the machine when operating it. Do not bend over the
machine to operate it, this is an awkward operating position that has the operator bring
their face close to the machine, and thus risk being struck by wood chips or debris.
EXTENSION CORDS: Improper use of extension cords may cause inefficient operation of
the log splitter which can result in overheating. Be sure the extension cord is no longer than
10m and its section is no less than 2.5mm
Avoid use of free and inadequately insulated connections. Connections must be made with
protected material suitable for outdoor use.
AVOID ELECTRICAL SHOCK: Check that the electric circuit is adequately protected and
that it corresponds with the power, voltage and frequency of the motor. Check that there is
a ground connection, and a regulation differential switch upstream.
Ground the log splitter. Prevent body contact with grounded surfaces: pipes, radiators,
ranges, and refrigerator enclosures.
Never open the push button box on the motor. Should this be necessary, contact a qualified
electrician.
Make sure your fingers do not touch the plug's metal prongs when plugging or unplugging
the log splitter.
AVOID BURNS: Avoid contact with hot oil, exhaust fumes and hot surfaces. Do not touch
the engine or exhaust, these parts get extremely hot from operation and remain hot for
a time after the unit is turned off. Allow the engine to cool before doing maintenance or
adjustment.
FM16 (Models D & TW)
to allow sufficient current flow to the motor.
2
5