Forest-Master FM16D Manual Del Usuario página 7

WORK BENCH and SAFETY GUARD
In the EU or UK, if you supply the log splitter to a third party to use, you must fit it with the work bench
and safety guard.
The work bench and safety guard are designed to be used only with log splitters that are two handed
operation. They must not be fitted to log splitters that can be operated one handed.
NEVER attempt to place a hand or hands in the guard when the log splitter is operation.
NEVER attempt to place logs in the guard or remove them from within the guard when the log splitter
is in operation.
NEVER allow a second person to assist in placing logs in or removing logs from within the guard
whether the log splitter is in operation or not.
Before using the log splitter, check all bolts securing the panels of the guard together, the bolts that
secure the cage to the work bench and the bolts that secure the work bench to the log splitter to ensure
they are secure.
DO NOT place fingers or other objects through the holes in the top and angled panels, these holes are
only to allow you to view the log.
DO NOT attempt to split a log greater than the specified maximum log diameter as this may result in
damage to the guard.
DO NOT attempt to load logs onto the log splitter through the front (fixed blade) opening.
ALWAYS load logs through the right hand rear opening.
DO NOT leave split logs lying inside the guard when splitting a subsequent log as these may be forced
against the cage and damage it.
FM16 (Models D & TW) 7