Publicidad
Idiomas disponibles
Idiomas disponibles
Keypad
Power button LED flashes
Continuous
2 flashes
3 flashes
4 flashes
5 flashes
6 flashes
9 flashes
10 flashes
Battery
Condition
The battery warning
LED flashes.
The battery warning
LED comes on.
2103 - 004 - 03.11.2023
Possible faults
Low battery power.
Undervoltage.
Bad battery.
Overcurrent.
High temperature.
Rotation block fault.
Protection mode activated. 1. Turn off the product.
Battery communication er-
ror.
Possible faults
Temperature deviation,
the battery is too cold or
too hot to use.
The battery is empty.
Permanent battery er-
ror.
Possible action
Charge the battery.
1. Turn off the product.
2. Turn on the product again.
3. If the problem continues, speak to
your servicing agent.
Replace the battery.
1. Turn off the product.
2. Turn on the product again.
3. If the problem continues, speak to
your servicing agent.
Let the product cool down.
1. Turn off the product.
2. Turn on the product again.
3. If the problem continues, speak to
your servicing agent.
2. Turn on the product again.
3. Change your work method if the
protection mode turns on again.
1. Remove the battery.
2. Clean the battery connectors with
compressed air or a soft brush.
3. Install the battery again correctly.
Possible procedure
Let the battery cool down or move it in-
doors to warm it up. When the battery has
the correct temperature, it can be used
again. Use the battery in ambient tempera-
Technical data on page
tures specified in
23 .
Charge the battery.
Speak to your dealer.
21
Publicidad
