Publicidad
Idiomas disponibles
Idiomas disponibles
centre to replace the faulty element with an original
spare part.
- If the compressor is located on a shelf or on a top
above floor height, it must be secured to prevent it
falling while in operation.
- Do not put objects or your hands inside the protective
grilles to avoid injury to yourself or damaging the
compressor.
- Do not use the compressor as a blunt object toward
things or animals, to avoid serious damage.
- When you have finished using the compressor, always
remove the plug from the power socket.
HINTS FOR EFFICIENT OPERATION
For efficient operation of the machine at full continuing
load and at maximum operating pressure, make sure the
temperature of the work environment indoors does not
exceed +25°C.
STORING THE PACKED AND UNPACKED
COMPRESSOR
For the whole time that the compressor is not used
before unpacking it, store it in a dry place at a
temperature between +5°C and + 45°C and sheltered
away from weather. For the whole time that the
compressor is not used after unpacking it, disconnect
from the mains supply, drain the air tank, place sheets
over it to protect it from dust, which may settle on the
components.
TRANSPORTING THE COMPRESSOR
When transporting the compressor in a vehicle, trailer,
etc. ensure that the air tank is drained and the unit is
secured and placed on a flat horizontal surface. Use
care when driving so to avoid tipping the unit over in the
vehicle. Damage can occur to the unit or surrounding
items if unit is tipped.
LIFTING THE DPC17PS
Always use two people when lifting and lift from the
recommended lift point handles (5A & 5B).
MOVING THE DPC17PS
1. Grasp handle (5A) to support compressor.
2. Pull handle (5C) until fully extended (lock position).
WARNING: Risk of unsafe operation. Ensure proper
footing and use caution when rolling compressor so that
unit does not tip or cause loss of balance.
3. To move, roll compressor on tires using handle (5C) as
shown above.
Store compressor in a vertical or horizontal position.
PNEUMATIC CONNECTIONS
Make sure you always use pneumatic tubes for
compressed air with maximum pressure characteristics
that are adequate for the compressor. Do not attempt to
repair tubes if faulty.
WE RESERVE THE RIGHT TO MAKE ANY
MODIFICATIONS WITHOUT PRIOR NOTICE WHENEVER
NECESSARY.
CLEANING
m WARNING: Blow dirt and dust out of the main
housing with dry air as often as dirt is seen collecting
in and around the air vents. Wear eye protection when
performing this procedure.
m WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the tool.
These chemicals may weaken the materials used in
these parts. Use a cloth dampened only with water and
mild soap. Never let any liquid get inside the tool; never
immerse.
OPTIONAL ACCESSORIES
m WARNING: Since accessories, other than those
offered by DEWALT, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only DEWALT
recommended accessories should be used with this
product.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your DEWALT
product needs replacement, or if it is of no further use to
you, do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at municipal
waste sites or by the retailer when you purchase a new
product.
DEWALT provides a facility for the collection and
recycling of DEWALT products once they have reached
the end of their working life. To take advantage of this
service please return your product to any authorised
repair agent who will collect them on our behalf.
You can check the location of your nearest authorised
EN GLI S H
17
Publicidad
