Publicidad
Idiomas disponibles
Idiomas disponibles
TDC Trolley Assembly
Assemble the Operator
1.
Install the track spacers evenly over the length of the track. Fasten
the spacers to the track with bolt (A) and flange hex nuts (B).
Spacers Provided
2
3
4
2.
Install the front idler to the track with bolts (F) and washers (D).
3.
Assemble the trolley with the take up bolt (C), hex nuts (E), and
lock washer (D).
4.
Slide the trolley onto the track.
5.
Insert bolts (A) into the end of the track and loosely thread the
nuts (B) onto the ends of the bolts.
6.
Slide bolts (A) on the end of the track assembly into the "L" slot in the operator and tighten nuts (B). Insert bolts (A)
into the holes on the end of the track and the operator. Secure the track with nuts (B).
Track Length
8-14 foot
16-20 foot
22-24 foot
A
B
A
A
B
B
C
11
HARDWARE
A
Bolt 3/8"-16
x 3/4"
Flange Hex Nut
B
3/8"-16
Take Up Bolt
C
D
Lock Washer
3/8"
E
Hex Nut
3/8"-16
Bolt
F
3/8"-16 x 1"
E
D
F
D
Publicidad
