Descargar Imprimir esta página

LiftMaster MAXUM JDC Serie Manual De Instalación página 10

Operadores industriales de cc ejes de unión, elevador y carro de cc para puertas

Publicidad

Idiomas disponibles

Idiomas disponibles

TDC Trolley Operators
To prevent possible SERIOUS INJURY or DEATH:
DO NOT connect electric power until instructed to
do so.
If the door lock needs to remain functional, install an
interlock switch.
ALWAYS call an Authorized Service Technician
if door binds, sticks, or is out of balance. An
unbalanced door may NOT reverse when required.
NEVER try to loosen, move, or adjust doors, door
springs, cable, pulleys, brackets, or their hardware.
ALL of which are under EXTREME tension and can
cause SERIOUS PERSONAL INJURY.
Carton Inventory
Your door operator is packaged in one carton which contains the motor unit and the items below. If anything is missing,
carefully check the packing material.
Description
Operator assembly
Installation manual and warning placards
Hardware box
Wall Controller
LiftMaster Monitored Entrapment Protection, CPS-U Photoelectric Sensors
Trolley drive chain
NOTE: Trolley tracks and drive chain are shipped separately from operator packaging.
Hardware
Fasteners
Track spacers
Trolley
Door arm assembly
Front idler
Header mounting bracket
 WARNING
Disable ALL locks and remove ALL ropes connected
to door BEFORE installing and operating door
operator to avoid entanglement.
Fasten the operator SECURELY to structural
supports of the building.
Concrete anchors MUST be used in installing ANY
brackets.
10

Publicidad

loading