Beurer EM 49 Instrucciones De Uso página 35

(4) Check electrode positions and ensure that adhesive electrodes do not
overlap.
(5) Gradually increase the impulse intensity.
(6) The batteries are almost empty. Replace the batteries.
The battery symbol is shown. How to proceed:
Replace all batteries.
You have an unpleasant sensation at the electrodes. How to proceed:
(1) The electrodes are not positioned correctly. Check their positions and
re-position, if necessary.
(2) The electrodes are worn. This may cause irritated skin as even distri-
bution of the current across the entire area is no longer guaranteed.
For this reason, replace the electrodes.
Skin in the treatment area turns red. How to proceed:
Immediately stop treatment and wait until your skin has returned to its
normal condition. If the redness is under the electrode and disappears
quickly, there is no risk – this is caused by the locally stimulated, in-
creased blood flow.
However, consult your doctor before you continue treatment if the skin
irritation persists and this is accompanied by an itchy sensation or in-
flammation. This may be caused by an allergic reaction to the adhesive
surface.
15. REPLACEMENT PARTS AND WEARING
PARTS
You can obtain the following replacement parts directly from Customer
Services:
Designation
8 x adhesive electrodes
(45 x 45 mm)
4 x adhesive electrodes
(50 x 100 mm)
Item number and/or order number
Item 661.02
Item 661.01
16. TECHNICAL SPECIFICATIONS
Name and model
Type
Output waveform
Pulse length
Pulse frequency
Output voltage
Output current
Voltage supply
Treatment time
Intensity
Operating conditions
Storage conditions
Transport conditions
Dimensions
Weight
Use Altitude Limit
Use Range Atmospheric
Pressure
The serial number is located on the device or in the battery compartment.
Note: If the device is not used acording to the instructions specified, per-
fect functionality cannot be guaranteed!
We reserve the right to make technical changes to improve and develop
the product.
This device complies with European standards EN60601-1 and EN60601-
1-2 (In accordance with IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
35
EM 49
EM 49
Biphasic rectangular pulse
50 – 450 µs
1 – 150 Hz
max. 100 Vpp (500 ohm)
max. 200 mApp (500 ohm)
3 x AAA batteries
Adjustable from 5 to 100 minutes
Adjustable from 0 to 50
5°C – 40°C (41°F – 104°F) at a relative
humidity of 40 –70%
0°C - 40°C (32°F - 104°F) at a relative
humidity of 0– 90%
-25°C- 70°C (-13°F-158°F) at a relative
humidity of 0– 90%
132 x 63 x 29.5 mm (including belt clip)
83 g (including belt clip, without batteries),
117 g (including belt clip and batteries)
3000 m
700 - 1060 hPa