Publicidad
Idiomas disponibles
Idiomas disponibles
3 Personal safety
3.1 Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs,
alcohol or medication. A moment of
inattention while operating power
tools may result in serious
personal injury
3.2 Use personal protective equipment.
Always wear eye protection.
Protective equipment such as a dust
mask, non-skid safety shoes, hard hat
or hearing protection used for
appropriate conditions will reduce
personal injuries
3.3 Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to power
source and/or battery pack, picking
up or carrying the tool. Carrying
power tools with your finger on the
switch or energising power tools that
have the switch on invites accidents
3.4 Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of power
tool may result in personal injury
3.5 Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations
3.6 Dress properly. Do not wear loose
clothing or jewellery. Keep your hair
and clothing away from moving
parts. Loose clothes, jewellery or long
hair can be caught in moving parts
3.7 If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards
3.8 Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action
can cause severe injury within a
fraction of a second
3.9 Switch off and remove the plug
from the mains if the cord is
entangled or damaged during use.
Entangled or damaged cords can
increase the risk of electric shock
4 Power tool use and care
4.1 Do not force the power tool. Use
correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed
4.2 Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired
4.3 Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
4.4 Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with power tool
or these instructions to operate the
power tool. Power tools are
dangerous in the hands of untrained
users
4.5 Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools
4.6 Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control
4.7 Use the power tool, accessories and
tool bits etc. in accordance with
these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation
4.8 Do not modify the tool. Modifications
can reduce the effectiveness of safety
measures and increase the risks to
the operator and/or bystander
4.9 Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations
7
4.10 Keep hoses and electrical cables
away from the working area of the
tool. During operation, hoses and
electrical cables may be hidden from
view and can be accidentally damaged
by the tool
5 Service
5.1 Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained
Publicidad
