Publicidad
Idiomas disponibles
Idiomas disponibles
w Rotate the tilting table to adjust the tilting
position of the camera. (Range: ±75 °)
• As it is a variable focal lens, it is possible
to change the field of view angle.
This lens can also be rotated in the
reverse direction, but the image azimuth
is reversed. In such a case, turn the pan-
ning table to the 180 ° side to correct the
azimuth image.
• When used at an angle that is close to
horizontal, it must be noted that the
shadow of the dome cover may be pro-
jected.
e Rotate the azimuth adjuster to adjust the
azimuth angle of the image. (Range:
±100 °)
14
All manuals and user guides at all-guides.com
3. Zoom and focus adjustment
At the same time as adjusting the pan and tilt
(Step 2), adjust the zoom and focus.
FAR
<Adjustment for WV-CF284 >
q Loosen the zoom lock lever and move
the lever between TELE and WIDE to
obtain the appropriate angle of view.
Tighten the zoom lock lever.
w Loosen the focus lock lever and move
the lever between FAR and NEAR to
obtain the optimum focus. Tighten the
focus lock lever.
Note: To change the angle of view by
moving the zoom lock lever, also
move the focus lock lever to adjust
the focus.
NEAR
WIDE
TELE
<WV-CF284>
Publicidad
