Kobalt SGY-AIR294 Manual Del Usuario página 15

CARE AND MAINTENANCE
2. Screw the Air Cap (D) and Air Cap Ring (E) onto
the face of the spray gun by turning it
clockwise and hand tighten.
3. Slide the Paint Needle through the back of the
spray gun.
NOTE: Make sure that you insert the needle through
the hole in the trigger for proper aliment.
4. Slide Needle Spring over the Paint Needle.
5.Screw on the Fluid Adjustment Knob (G) clockwise.
2
E
D
Clockwise
3
4
5
15
Clockwise
G