Moving the Patient
The legs of the stand assist lift MUST be in the maximum open position for optimum stability
and safety. If the patient is in a sling and it becomes necessary to move through a narrow
passage, close the legs of the stand assist lift only as long as it takes to move through the passage.
When the stand assist lift is through the passage, return the legs to the maximum open position.
DO NOT, during transfer of a patient suspended in the lift sling, roll caster base over uneven sur-
faces that would create an imbalance of the lift. This could cause the lift to tip over. Use the mast
handle at all times to push or pull the lift.
1.
Ensure the legs of the stand assist lift are in the maximum open position. If not, press the OPEN LEGS button on the
hand control to move the legs to the maximum open position.
2.
Move the stand assist lift away from the surface they were lifted from.
3.
Slowly move the patient to the desired surface.
Part No. 1164940
WARNING
19
SECTION 4—LIFTING THE PATIENT
Roze™Stand Assist Patient Lift