Sartorius Quintix Pro QTX324IRU-1z Instrucciones De Manejo página 11

3.3 Connections
1
Fig. 4: Rear of Quintix Pro (example)
®
Pos . Name
1 USB-C connection
2 Power supply
3 Ethernet connection
4 USB-C connection
5 PC USB connection
6 RS232 connection
3.4 Conformity-assessed Devices
Some settings of conformity-assessed models are protected against operator changes, e.g., "external adjustment".
This measure is intended to ensure the suitability of the devices for use in legal metrology.
3.5 Accessories
Accessories are available for the device. These enable the device to be customized to the specific conditions during
weighing procedures, e.g. printer.
3.6 Below-balance Weighing
The device can be configured for below-balance weighing. Samples can be suspended for weighing using below-bal-
ance weighing, e.g. samples, which do not fit on the weighing pan.
For below-balance weighing, the hook must be installed in the device base and the device set up on a weighing table
with recess.
In legal metrology:
— The below-balance weighing equipment may not be used.
— The cover of the below-balance weighing equipment may not be opened.
Description
For connecting accessories.
For connection to a network.
For connecting accessories.
For connection to a PC.
For connection to a PC or an accessory.
Device Description
2 3 4 5 6
Operating Instructions Quintix Pro 11
®