Publicidad
Idiomas disponibles
Idiomas disponibles
POWER
Press and release the Power button on the handle
to turn on power. To turn off power, press the
button again.
HARD FLOOR MODE
Use Hard Floor mode for powerful cleaning on bare
floors. To activate Hard Floor mode, turn on the unit
and tilt the handle back.
NOTE: To prevent leakage, DO NOT place the main body on the floor. The nozzle should always be kept flat on the floor.
NOTE: If you encounter a difficult stain, use Freshen Mode for improved stain cleaning.
NOTE: If you encounter a stubborn odor on your floor or area rug, continue to clean in Freshen Mode until the odor is gone.
NOTE: If your floors are cloudy, streaky, or spotty after cleaning, it may be due to accumulated soap or grease residue. The
floor may require several cleanings with the Hydrovac.
sha rkcl ea n.e u
USING YOUR 3-IN-1 CLEANER
CONTROLS
CLEANING MODES
FRESHEN MODE MODE
To clean area rugs, press the Freshen Mode icon on
top of the handle. The Freshen Mode light on the
main body will illuminate. To turn off Freshen Mode
mode, press the button again.
Publicidad
