Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: To reduce the risk of shock and unintended operation, turn off power before servicing.
LED INDICATOR
The Water Droplet LED is
pulsing red.
The Water Droplet LED is
pulsing aqua.
The Freshen Mode icon and the
three water droplet lights are
flashing red at the same time.
The Freshen Mode icon and
the three water droplet lights
are flashing red out of sync.
Self-Clean icon and droplets
are flashing blue.
Self-Clean icon and droplets
are flashing red.
Replace the filter and brushroll every 6 months. Only use Shark HydroVac Disinfectant,
Shark HydroVac Concentrate, or water with the Shark HydroVac. To order brushrolls,
filters, Shark HydroVac Multi-Surface Concentrate, and Shark HydroVac. Disinfectant,
please visit sharkclean.eu or scan the QR code here.
NOTE: If 3-in-1 Cleaner still does not operate properly, contact Customer Service at +44 (0)800 862 0453 or
www.sharkclean.eu
MAINTAINING YOUR 3-IN-1 CLEANER
TROUBLESHOOTING
WHAT IT MEANS
The dirty water tank is full.
The clean solution tank is
empty.
Brushroll cover is not installed
properly.
The brushroll is jammed.
Not enough solution to run
Self-Clean Cycle.
Dirty water tank is full and
preventing Self-Clean Cycle to run.
ORDERING REFILLS AND PARTS
WHAT TO DO
Empty the fluid in the dirty
water tank.
If this is a false error, remove
solids separator and clean
completely. Allow part to dry
for 24 hours or dry manually.
Fill the clean solution tank.
Refer to the "Filling the Clean
Solution Tank" section.
Refer to the "Cleaning the
Brushroll" section, step 4
Turn off the power before
cleaning the brushroll and any
debris that may be causing
the jam. Refer to the "Cleaning
the Brushroll" section.
Fill clean solution tank to
allow self-clean cycle to run.
Empty dirty water tank to
allow self-clean cycle to run.
s ha rkcl ean.eu
Publicidad
