Shark WD100EU Serie Manual De Instrucciones página 31

RECOMMENDED AFTER EVERY USE
1. Place the unit on the Storage Dock. The Self-
Clean mode icon located on the top of the main
body will pulse.
2. Empty the Dirty Water Tank and make sure the
clean solution tank is at least half full.
3. Press the Power Button to start the self-clean
cycle. The icon will illuminate for the full 2-minute
duration of the cycle.
4. DO NOT remove the unit from the tray during the
self-cleaning cycle. The icon will turn off when the
cycle is complete.
5. Empty the dirty water tank.
See Troubleshooting for more information on
Self-Clean information.
NOTE: Make sure the clean solution tank is at least half full and that the dirty water tank is empty before running the self-
cleaning cycle.
MAINTAINING YOUR 3-IN-1 CLEANER
SELF-CLEANING MODE
s ha rkcl ean.eu