Shark WD100EU Serie Manual De Instrucciones página 29

Press the release button and lift off the Clean Solution Tank.
Unscrew the cap and add water to the tank, up to the WATER line. Next, add Shark HydroVac Multi-Surface
Concentrate, filling to the HYDROVAC CONCENTRATE line. Replace the cap and reinsert the tank until it clicks
into place. The top of the tank should be flush with the top of the body.
NOTE: Only use Shark HydroVac Multi-Surface Cleaning Solution and water with this product.
NOTE: Be sure to not overfill the Clean Solution Tank with more HydroVac Multi Surface Concentrate than instructed, as this
may clause streaking.
NOTE: Without sufficient water supply in the clean solution tank, HydroVac will not run.
USING YOUR 3-IN-1 CLEANER
FILLING THE CLEAN SOLUTION TANK
REMOVE THE CLEAN SOLUTION TANK
FILL THE CLEAN SOLUTION TANK
1
2
s ha rkcl ean.eu