Parkside PBK 4 B3 Traduccion Del Manual De Instrucciones Originales página 46

GB MT
cool down before checking, adjusting,
etc.
b) Store the hedge trimmer in a place
where fuel vapours cannot come into
contact with open flames or sparks. Al-
ways let the hedge trimmer cool down
before you put it into storage.
c) When transporting or storing the hedge
trimmer, always attach the transport
protection to the cutting attachment.
Additional information
• Use the shoulder strap and hold the
machine by the handle and round
handle. Take breaks and change your
working position regularly.
• Always ensure good ventilation when
handling fuel. Do not smoke while refu-
elling and keep any heat sources at a
distance. Never refuel while the engine
is running.
• Before removing blockages, switch
off the engine and let the device cool
down.
Safety information for
pruners
National regulations may limit the
use of the machine.
• Inspect the machine daily before each
use and after dropping or other impacts
to check for significant damage or de-
fects.
• Do not use the machine near overhead
power lines. Otherwise there is a risk of
electric shock!
• Wear personal protective equipment
when using the machine: Hearing
protection, eye protection (visor or gog-
gles), head protection and cut-proof,
tight-fitting work clothes.
46
• Wear non-slip foot protection when us-
ing the machine.
• Duration of use and breaks
Prolonged use of the machine can lead
to problems with the blood circulation in
the hands caused by vibrations, known
as white finger disease. You can how-
ever extend your potential machine use
time by wearing appropriate gloves or
by taking regular breaks. Please ensure
that if you are susceptible to poor cir-
culation, low outside temperatures or
strong gripping forces while working,
this may reduce the length of time for
which you are able to work.
• Always remain attentive. Pay
attention to what you are doing.
Use common sense. Do not use ma-
chines if you are tired. You may not op-
erate the machine under the influence of
alcohol, medication or drugs that impair
your ability to react.
• Use the shoulder strap and hold the ma-
chine by the handle and round handle.
Take breaks and change your working
position regularly.
• Keep a safe distance from other persons
and hold the machine only by the speci-
fied grip surfaces.
• When cutting overhead, take care not to
be hit by falling branches.
• Do not assume a dangerous
working position. Never work on a
ladder! Only work on firm and stable
surfaces! Avoid an abnormal body
posture. Keep your balance at all times.
Ensure that there is sufficient lighting
during the work. Make sure you have a
secure footing in wet conditions, snow,
ice, on slopes and on uneven terrain.
• Warning of exhaust emissions
The machine produces toxic exhaust
gases as soon as the engine is running.
These gases can be odourless and