Publicidad
Idiomas disponibles
Idiomas disponibles
Getting Started Guide
Prepare the power cord
All plasma power supplies include power cords as shown here:
Unit
CSA
CSA
CE / CCC
CE / CCC
Step 2 - Connect the gas supply
1
CSA: Tighten the 1/4 NPT fitting to 11 N·m
(100 lbf in).
2
CE/CCC: Tighten the G-1/4 BSPP adapter
to 10 N·m (90 lbf in).
Gas requirements
Use clean, moisture-free air and gas.
Use a high-pressure regulator with shop-compressed gas or cylinder-compressed gas.
For optimum system performance, make sure that the gas inlet flow rates meet these
requirements:
Cutting - 212 slpm (450 scfh) at a minimum 5.9 bar (85 psi).
Gouging - 212 slpm (450 scfh) at a minimum 4.8 bar (70 psi).
4
Input Voltage
(Functional Range)
200 V - 240 V
480 V
100 V - 240 V
380 V - 400 V
English
Revision 0
Phase
1-phase
14 AWG 4-wire power cord
3-phase
1-phase
2.5 mm
3-phase
2
3
1
3
Use an inert gas hose with an internal
diameter of 10 mm (3/8 in.) or more.
811520MU
Getting Started Guide
Power cord
10 AWG 3-wire
Power plug included
Power plug not included
6mm
2
3-wire H07RN-F
Power plug not included
2
4-wire H07RN-F
Power plug not included
Powermax45 SYNC
Publicidad
