Eaton TRIPP LITE Serie Manual Del Usuario página 14

1. Closure Assembly
18
Install the screws of the nut component and fasten the screws (Figure 1-19).
19
Push and screw all the components for the pass-through cable inward
(Figure 1-20).
14
04-061-93-47BC_revA.indb 14 04-061-93-47BC_revA.indb 14
Figure 1-19: Fasten the screws
Figure 1-20: Install all the components
1/30/2024 3:26:22 PM 1/30/2024 3:26:22 PM