Eaton TRIPP LITE Serie Manual Del Usuario página 15

1. Closure Assembly
20
For the unused pass-through cable hole, use a single-hole grommet to seal
the cable entry (Figure 1-21).
Note: If a single-hole grommet does not provide a seal, a choke plug should be inserted into
this hole.
04-061-93-47BC_revA.indb 15 04-061-93-47BC_revA.indb 15
Description
Quantity
Figure 1-21: Seal the unused pass-through cable hole
Choke Plug
(Ø12.5 mm)
6 Pcs.
15
1/30/2024 3:26:22 PM 1/30/2024 3:26:22 PM