Eaton TRIPP LITE Serie Manual Del Usuario página 7

1. Closure Assembly
8
Strip the sheath of the uncut cable for a suitable length ≥4 ft. (1.2 m)
(Figure 1-9).
9
Cut the strength member of the cable from the stripped cable sheath to
2.4 in. (60 mm) to fix the cable (Figure 1-10).
04-061-93-47BC_revA.indb 7 04-061-93-47BC_revA.indb 7
protecting sleeve Bare fiber
Bare fiber loose tube
Cable sheath
Figure 1-9: Strip the uncut cable
60 mm
Figure 1-10: Cut the strength member
Bare fiber
Strength member
7
1/30/2024 3:26:21 PM 1/30/2024 3:26:21 PM