Eaton TRIPP LITE Serie Manual Del Usuario página 4

1. Closure Assembly
2
Remove the nut component from the pass-through cable entry (Figure 1-3).
Note: The cable entry is suitable for uncut cable or branching cable.
3
Loosen the two screws of the nut component, then open the nut component
(Figure 1-4).
4
04-061-93-47BC_revA.indb 4 04-061-93-47BC_revA.indb 4
Figure 1-3: Remove the nut component
Figure 1-4: Open the nut component
1/30/2024 3:26:20 PM 1/30/2024 3:26:20 PM