Eaton TRIPP LITE Serie Manual Del Usuario página 18

1. Closure Assembly
5
Attach the branching cable into the hole: insert the strength member, then
secure the strength member with the screw (Figure 1-26).
6
Secure the upper press clamping (Figure 1-27).
Note: When bare fiber cable is used, an EVA tube should be applied to protect the bare fiber
and insulation tape should be used to wrap the EVA tube and cable.
A
18
04-061-93-47BC_revA.indb 18 04-061-93-47BC_revA.indb 18
Figure 1-26: Attach the strength member
A
Figure 1-27: Secure the press clamping
Description
Quantity
Insulation Tape
1 Roll
1/30/2024 3:26:22 PM 1/30/2024 3:26:22 PM