Eaton TRIPP LITE Serie Manual Del Usuario página 17

1. Closure Assembly
3
Strip the branching cable to a suitable length of ≥4 ft. (1.2 m) (Figure 1-24).
4
Cut the strength member of the cable from the stripped cable sheath 2.4 in.
(60 mm) to fix the cable (Figure 1-25).
04-061-93-47BC_revA.indb 17 04-061-93-47BC_revA.indb 17
Figure 1-24: Strip the branching cable
Figure 1-25: Strength member
Bare fiber
Bare fiber protective sleeve
Strength member
17
1/30/2024 3:26:22 PM 1/30/2024 3:26:22 PM