Beurer IL 35 Instrucciones De Uso página 13

- Do not allow water to spray onto the device.
- Only operate the device if it is completely dry.
Safe handling
 WARNING
• This device is not intended for commercial use; it is designed
exclusively for use in a private home.
• The infrared radiation from this device may cause eye irritation.
Do not look into the light source and use the enclosed protective
eyewear.
• Keep packaging material away from children (risk of su ocation).
• Always use the protective eyewear supplied during usage.
• Do not use on babies and small children.
• This device is not intended for use on changing units, cots or
similar.
• Never use the device in proximity to water.
• If the device has been dropped or exposed to high levels of hu-
midity or has su ered any other damage, it must no longer be
used.
• The device must not be immersed in water or any other liquid
and no liquid must penetrate the device.
• To avoid the risk of fire and burns, do not leave the device unat-
tended during operation.
• Switch the device o immediately if it is faulty or not working
properly.
• To avoid damage to the device, always pull the mains plug out of
the socket after use and in the event of a power failure.
• If the socket to which the device is connected is not properly
connected, the plug of the device will heat up. To avoid the risk
of fire and burns, make sure that you plug the device into a prop-
erly installed socket.
Important notes
 WARNING
• The distance between the body part and the infrared lamp is
generally determined based on individual sensitivity to heat and
the type of treatment being performed. The greater the distance
between you and the device, the larger the treatment area and
the lower the heat of the infrared light. At a smaller distance,
the treatment area is reduced and the heat of the infrared light
becomes more intense.
• Limit the length of use and check the skin's reaction.
• An appropriate distance between the infrared lamp and the de-
sired treatment area must be maintained during treatment so
that no skin irritation, such as tingling, itching, and burning, or
too high heat sensitivity occurs. Stop the treatment if this occurs.
Alternatively, increase the radiation distance and/or reduce the
radiation duration.
• This device is not intended for radiation from above.
• This product is not suitable for lighting rooms in private homes.
• To avoid accidental contact with the hot light source, make sure
that there is su cient distance between you and the device. Se-
lect the distance to the device such that the heat feels pleasant
for you.
• Medications, cosmetics or food products can lead to a hyper-
sensitive or allergic skin reaction in some cases. Should this oc-
cur, radiation should be stopped immediately.
• Exercise particular caution and attentiveness during continued
operation of the device.
• Do not use the device if you are tired and there is a risk of falling
asleep during radiation.
• Overly prolonged radiation may lead to the skin being burned.
• Children do not recognise the dangers posed by electrical devic-
es. Make sure that the device cannot be used by children without
supervision.
• Do not use the device in a linty or dusty environment.
Warning and safety notes on protective eyewear
 WARNING
• Keep packaging material away from children. There is a risk of
su ocation.
• Children must not play with the protective eyewear.
• Before using the protective eyewear, check it for signs of exter-
nal damage (e.g. cracks or holes). If the protective eyewear is
damaged, you must NOT continue using it.
• When wearing the protective eyewear, people with sensitive skin
may have an allergic reaction to the materials of the eyewear that
may come into contact with the skin.
• Make sure that the protective eyewear does not come into con-
tact with grease, oils or alcohol (e.g. cleaning products or facial
toners).
• Use the protective eyewear only in quiet environments, so that
you are not disturbed during use.
Repairs
 WARNING
• Risk of electric shock! You may only open the device to change
the infrared lamp. Disconnect the mains cable from the socket
before replacing the infrared lamp! Never try to repair the device
yourself, as faultless functionality can no longer be guaranteed
thereafter. Failure to comply with this instruction will void the
warranty.
• Never operate the device during maintenance work.
• For repairs, please contact Customer Services or an authorised
retailer.
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Light source
1
First LED = readiness indicator/standby
2
Base
3
Lamp shade
4
LED timer indicatio
5
On/O button + timer button
6
6. INITIAL USE
6.1 Prior to initial use
NOTICE
• Before using the device, remove all packaging material.
• Check the device for signs of wear and tear or damage. If the de-
vice is damaged or you have any doubts, do not use it and con-
tact your retailer or Customer Services at the address provided.
• The manufacturer is not liable for damage resulting from improp-
er or incorrect use.
• Before use, check whether the light source is securely inserted.
• Protect the device from dust, dirt, sunshine and moisture.
6.2 Unpacking and setup
 WARNING
• The device should not be laid flat or positioned at an angle.
• Always ensure that your device is securely positioned on a level
surface.
• The minimum distance between combustible objects and the
infrared lamp must not be less than 1 metre.
13