Beurer IL 35 Instrucciones De Uso página 15

8.3 Storage
1. Remove the mains plug and allow the device to cool fully before
moving it.
2. If you do not plan to use the protective eyewear for an extended
period of time, we recommend storing it in its original packaging
in a dry environment, ensuring that it is not weighed down by
other items.
3. The device should ideally be stored in the original packaging and
in a dry place.
9. REPLACEMENT PARTS AND WEARING
PARTS
To purchase wear parts and replacement parts, please visit www.
beurer.com or contact the corresponding service address (accord-
ing to the service address list) in your country.
Replacement lamp/type:
Infrared PAR 38 (150 W)
Replacement part:
Protective eyewear
10. WHAT IF THERE ARE PROBLEMS?
Problem Possible cause
Infrared lamp
ON/OFF switch
does not
was not pressed
illuminate
No power
Infrared lamp burn
time exceeded
After replacing the
infrared lamp, the new
infrared lamp was not
inserted correctly
11. DISPOSAL
For environmental reasons, do not dispose of the device in house-
hold waste at the end of its service life. Dispose of the device at a
suitable local collection or recycling point in your country.
Observe the local regulations for material disposal. Dis-
pose of the device in accordance with EC Directive Waste
Electrical and Electronic Equipment (WEEE). If you have
any questions, please contact the local authorities re-
sponsible for waste disposal. You can obtain the location
of collection points for old devices from the local or municipal au-
thorities, local waste disposal companies or your retailer, for exam-
ple.
12. TECHNICAL SPECIFICATIONS
12.1 Infrared lamp
Mains connection AC 220 V - 230 V / 50 - 60 Hz
Power consumption 150 W
Risk group RG2, medium risk group
Timer Adjustable from 5 to 15 minutes
Technical specifi- Article
cations: number:
230 V ~ 50 Hz 616.51
Article
number:
200.345
Solution
Press the ON/OFF
6
button 6
Plug the mains plug into
the socket correctly
The infrared lamp is
faulty. Contact Cus-
tomer Services or your
retailer
Check that the new
infrared lamp has been
fitted correctly as de-
scribed in Chapter 8.2
Max. irradiation
intensity according to
EN 62471
Dimensions (W x H
x D)
Weight
Operating conditions
Storage and
transportation
conditions
Emitted infrared
wavelength range
Protection class
Expected burn time of
light source
Safety distance to the
eyes
IP protection class
Expected service life of
the device
If the device is not used according to the specifications, perfect
functionality cannot be guaranteed! We reserve the right to make
technical changes to improve and develop the product.
This device conforms with the European standard EN 60601-1-2
(Group 1, Class B, in accordance with CISPR 11, IEC 61000-3-2,
IEC 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-11, IEC 61000-4-39)
and is subject to particular precautions with regard to electromag-
netic compatibility. Please note that portable and mobile HF com-
munication systems may interfere with this device. More details can
be requested from the stated Customer Service address or found at
the end of the instructions for use. This device meets the require-
ments of the European Medical Devices Directive 93/42/EEC with
amendments as well as the German Medical Devices Act.
The serial number is located on the device or in the battery com-
partment.
Notes on electromagnetic compatibility
• The device is suitable for use in all environments listed in these
instructions for use, including domestic environments.
• The device may not be fully usable in the presence of electro-
magnetic disturbances. This could result in issues such as error
messages or the failure of the display/device.
• Avoid using this device directly next to other devices or stacked
on top of other devices, as this could lead to faulty operation. If,
however, it is necessary to use the device in the manner stated,
15
<3200 W/m
2
145 x 175 x 220 mm
approx. 800 g
Temperature: +5 °C to +35 °C
Relative humidity: 15 % - 93 %,
Ambient pressure: 700 hPA - 1060 hPa
Temperature: -25 °C to +70 °C
Relative humidity: ≤ 93 %
IRA + IRB / 780-3000 nm
II
300 hours
18,5 cm
IP20
Information on the service life of the
product can be found on the homepage