Publicidad
Idiomas disponibles
Idiomas disponibles
Autoranging Multimeter/English
Input Limits
Function
V DC or V AC
mA DC/AC
A DC/AC
Resistance, Diode test,
Continuity,
Temperature
SAFETY SYMBOLS
This symbol adjacent to another symbol, terminal or
operating device indicates that the operator must refer to
an explanation in the Operating Instructions to avoid
personal injury or damage to the meter.
This
WARNING
symbol indicates a potentially hazardous
WARNING
situation, which if not avoided, could result in death or
serious injury.
This
CAUTION
symbol indicates a potentially hazardous
CAUTION
situation, which if not avoided, may result damage to the
product.
This symbol advises the user that the terminal(s) so marked
MAX
must not be connected to a circuit point at which the voltage
500V
with respect to earth ground exceeds (in this case) 500 VAC
or VDC.
2
Maximum Input
CATIII-600V DC /AC
200mA/250V DC/AC
10A/250V DC/AC (30 seconds
max every 15 minutes)
250V DC/AC
This symbol adjacent to one or more terminals identifies them
as being associated with ranges that may, in normal use,
be subjected to particularly hazardous voltages. For
maximum safety, the meter and its test leads should not be
handled when these terminals are energized.
CONTROLS AND JACKS
1. 2000 count Liquid Crystal Display
with symbolic signs
2. Function switch
3. 10A (positive) input jack for 10A DC
or AC measurements
4. COM (negative) input jack
5. Positive input jack
6. Range pushbutton
7. Mode pushbutton: selection Continuity/
Diode, AC/DC, Temperature(C/F)
8. DATA HOLD/BACKLIGHT CONTROL pushbutton
9. MAX. Hold pushbutton
SYMBOLS AND ANNUNCIATORS
•)))
Continuity
BAT
Low Battery
Diode
HOLD
Data Hold
MAX
Max data Hold
AUTO
AutoRanging
AC
Alternating Current or Voltage
DC
Direct Current or Voltage
ºF
Degrees Fahrenheit
ºC
Degrees Centigrade
Autoranging Multimeter/English
1
6
8
7
9
2
3
5
4
3
Publicidad
