cecotec CECOFRY PANORAMIC 9000 Manual De Instrucciones página 52

ENGLISH
Instructions for use
1. Start mode
First, connect the air fryer to the mains. When you do so, you will hear a beep and all icons/
indicator lights will light up for one second. The only icon that will remain lit after this time
will be the Power icon.
2. Standby mode
Press the Power icon. The left and right basket selection icons will light up. The air fryer will
enter standby mode. If the fryer is in standby mode and no operation has been performed for
5 minutes, the basket selection icons will turn off. The only icon that will remain lit after this
time will be the Power icon.
3. Cooking using one side of the basket (using the separator)
Fig. 3
3.1. Press the left/right basket selection icon. By default, one menu will flash, and the
indicator lights of the other menus will be lit steadily. The temperature and time indicator
lights will also flash. If you cancel the selection of both sides of the basket, the air fryer will
enter standby mode.
3.2. To select the menu you want, press the menu selection icon. Then, set the time and
temperature.
3.3. When you have set the temperature and time, press the Power icon. Cooking will start on
the right/left side. The display will show the remaining time and the indicator lights that were
flashing will stop doing so. The indicator light of the menu you have selected will remain lit;
the other menu indicator lights will go out.
3.4. If you wish to adjust the temperature or time during the cooking process, do so by
pressing the increase/decrease time or temperature icon. During the adjustment process, the
fryer continues to operate.
3.5. If you wish to change menus during the cooking process, press the menu selection icon.
Cooking will pause and the icon of the selected menu and the display will flash, indicating
that you can select another menu and adjust the time and temperature.
52
FUN&TASTE P'CORN