Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
3. Turn the threads counterclockwise to secure the telescopic tubes in position. This
guarantees that the tubes are firmly connected and that the selected height remains
stable.
4. Insert the lower tube into the base. Turn the threads to secure it in place. Make sure that it
is securely fastened to provide stability to the fan.
5. Place the base on a flat and stable surface. In this way the fan will be level and thus avoid
vibrations or unbalance during operation.
6. Insert the fan head, which includes the motor and blades, into the top tube of the aluminium
tubes. Make sure that the head is inserted correctly.
4. OPERATION
NOTE:
-
Ensure that the power cord of the appliance does not create a tripping or falling hazard.
-
Always place the fan on a level surface.
-
The appliance should be placed in a dry, cool, and well-ventilated place. Keep the fan away
from heat sources, corrosive gases and avoid direct sunlight.
-
Do not attempt to move the appliance while it is in operation, ensure that it is switched off
before attempting to move it.
Control panel. Fig. 3
1.
Power icon
2. Timer icon
3. Light icon
4. Reverse icon
5. Speed icon
-
Press the
icon, to switch on/off the fan.
-
Press the
choose the one you prefer, press the icon several times until you find the one you like. You
can switch between them by pressing the icon repeatedly until you reach the one you want.
-
Press the
added. The timer can be set from 1 to 8 hours. If you switch off the fan, the timer will be
deactivated.
-
Press the
-
Press the
between them by pressing the icon repeatedly until you reach the one you want.
40
ENERGYSILENCE FANLAMP
icon to switch on the light. This fan has three different light intensities. To
icon to set the timer. Each time you press it, one hour of operation will be
icon to change the air direction. Air will come out of the top or the bottom.
icon to change speed. This fan has nine speeds (1-9). You can switch
Publicidad
