Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Changing the remote-control battery
-
The remote control requires 1 x CR2025 battery. To change it:
1.
Turn the remote control over and remove the battery compartment cover.
2. Remove the dead battery.
3. Put a new one of the same type. Observe polarity markings.
5. CLEANING AND MAINTENANCE
Caution: turn off the appliance and unplug it from the mains before cleaning or performing any
maintenance.
-
Clean the fan with a duster or soft cloth.
-
Never use chemical solvents, as they may damage the appliance. Make sure that no water
enters the control panel or the fan motor.
-
Do not operate the appliance until it is completely dry.
-
To store it, place it in its original box or cover it to protect it from dust.
-
Store it in a cool and dry place.
6. TROUBLESHOOTING
Do not try to repair or disassemble the appliance yourself. This would void the warranty and
could be dangerous for you.
The fan does not start up
-
Check that the plug is correctly inserted into the socket.
-
Check if the Power button was pressed.
-
Check that the power cord is properly connected to a power outlet.
The fan moves
-
Check that it is placed on a flat surface.
-
Check if there are any foreign objects under the fan.
-
If it is not any of the above problems, please contact the official Cecotec Technical Support
Service.
42
ENERGYSILENCE FANLAMP
Publicidad
