d) Washing (right side):
Activation : In standby mode, press the right "WASH" button to start washing on the
•
right side. The right rammer engine will start.
End of process : The washing process will end automatically after the set time or it
•
can be stopped earlier by pressing the right "WASH" button again.
e) Keeping fresh:
Activation : Press the "STANDBY" button in standby mode, the machine will enter
•
keep fresh mode.
Deactivation : Pressing the STANDBY button again will exit the keep fresh mode.
•
Setting functions
a) Viewing and resetting the batch number:
Viewing : Press "SET" button to display the batch number in XXXX mode.
•
Reset : To clear the displayed number, hold down the "SET" button for 15 seconds.
•
b) Setting the hardness level:
Activation : Press and hold the "SET" button for 2 seconds until the window flashes.
•
Adjustment : Use the UP button to increase the hardness of the ice cream or the
•
DOWN button to decrease it. The adjustment range is from 1 to 10.
Saving : After making the settings, press the "SET" button again or wait 5 seconds
•
without operation, the system will automatically save the parameter.
c) Parameter setting list:
Access the list : Hold the "SET" button for 5 seconds. The display will show a digital
•
index of parameters from P0 to P5.
Adjusting parameters : Once the parameter you are interested in is displayed (e.g.
•
SET 03), use the cool button on the right to increase the value or the clear button to
decrease it. The value range is 1 to 10.
Saving : If you do not perform any operation within 10 seconds, the system will
•
automatically save the current parameter and exit the setting mode.
Icon
Function description
P0
The degree of granulation of
ice cream
P1
Tank pre-cooling
temperature
P2
Washing time
P3
Machine cycle start time
P4
Rammer motor stop delay
time
Q5
Machine stop time due to
EN
Setting range
Range: 1 to 10 degrees
Range: 1 to 8 ℃
Range: 1 to 30 minutes
Range: 5 to 15 minutes
Range: 10 to 30 s
Range: 0 to 10 minutes, 0
Default
3
6
10
6
15
0