Royal Catering RCSI-18A Manual De Instrucciones página 36

Cleaning the condenser
Cleaning the condenser every six months is important to maintain cooling efficiency.
Here's how to do it:
1) Unplug the power : Always start by unplugging the main power switch.
2) Access to the condenser : Remove the rear panel and side panels of the machine.
3) Dust Removal : Gently remove dust and other debris from the condenser fins using a
vacuum cleaner, compressed air and a hairbrush, being careful not to damage the
fins.
Strap adjustment
To ensure proper operation of the machine, it is important to regularly check and adjust
the belt tension. Here's how to do it:
1) Disconnect Power : Always start by disconnecting the machine's main power to
ensure safety.
2) Belt Access : Remove the back panel and side panels to access the drive belt.
3) Tension Adjustment : Use the tension screw to adjust the belt tension. Make sure
the belt is tight enough, not too loose and not too tight.
EN