Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
03/10/23 11:11:34 32KPF600_053
RIDING
Review Motorcycle Safety (pages
6
) before you ride.
Make sure you understand the function
of the side stand mechanism. (See MAIN-
TENANCE SCHEDULE on page
explanation f or SIDE ST AND on page
75
)
1.
After the engine has been warmed up,
the motorcycle is ready for riding.
2.
While the engine is idling, pull in the
clutch lever and depress the gearshift
pedal to shift into 1st (low) gear.
3.
Slowly release the clutch lever and at the
same time gradually increase engine
s p e e d b y o p e n i n g t h e t h r o t t l e .
Coordination of the throttle and clutch
lever will assure a smooth positive start.
4.
When the motorcycle attains a moderate
speed, close the throttle, pull in the clutch
lever and shift to 2nd gear by raising the
gearshift pedal.
1
−
This sequence is repeated to progres-
sively shift to 3rd, 4th, 5th and 6th(top)
gear.
5.
Coordinate the throttle and brakes for
53
and
smooth deceleration.
6.
Both front and rear brakes should be
used at the same time and should not be
applied strongly enough to lock the wheel,
or braking effectiveness will be reduced
and control of the motorcycle be difficult.
47
Publicidad
Tabla de contenido
