Honda CBF250 Manual Del Propietário página 69

03/10/23 11:13:26 32KPF600_069
7. Check that the sealing washer on the
drain plug is in good condition and install
the plug. Replace the sealing washer
every other time the oil is changed, or
each time if necessary.
Oil Drain Plug Torque:
29 N·m (3.0 kgf·m , 22 lbf·ft)
8. Fill the crankcase with the recommended
grade oil; approximately:
1.5 (1.6 US qt , 1.3 Imp qt)
9. Install the oil filler cap/dipstick.
10. Start the engine and let it idle for 3 5
minutes.
11. Stop the engine and check that the oil
level is at the upper level mark on the
dipstick with the motorcycle upright on
firm, level ground. Make sure there are
no oil leaks.
When running in very dusty conditions,
oil changes should be performed more
f requent ly t han specif ied in the
maintenance schedule.
Please dispose of used engine oil in a
manner that is compatible with the
environment. We suggest you take it in a
sealed container to your local recycling
center or service station for reclamation.
Do not throw it in the rubbish or pour it
on the ground or down a drain.
Used engine oil may cause skin can-
cer if repeatedly left in contact with
the skin f or prolonged periods.
−
Although this is unlikely unless you
handle used oil on a daily basis, it is
still advisable to thoroughly wash
your hands with soap and water as
soon as possible after handling used
oil.
63