Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
03/10/23 11:13:46 32KPF600_071
4.
Check the spark plug gap (
wire-type feeler gauge. If adjustment is
necessary, bend the side electrode (
carefully.
The gap should be:
0.80 0.90 mm (0.031 0.035 in)
−
Make sure the plug washer is in good
condition.
(4)
(3) Spark plug gap
3
) using a
With the plug washer attached, thread
5.
the spark plug in by hand to prevent
4
)
cross-threading.
6.
Tighten a new spark plug 1/2 turn with a
spark plug wrench to compress the
−
washer. If you are reusing a plug, it
should only take 1/8 1/4 turn after the
plug seats.
Reinstall the spark plug cap.
7.
The spark plug must be securely
tightened. An improperly tightened
plug can become very hot and
(3)
possibly damage the engine.
Never use a spark plug with an im-
proper heat range. Severe engine
damage could result.
(4) Side electrode
−
65
Publicidad
Tabla de contenido
