Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
03/10/23 11:14:45 32KPF600_079
Lubrication and cleaning:
Lubricate every 1,000 km (600 miles) or
sooner if chain appears dry.
The O-rings in this chain can be damaged
by steam cleaning, high pressure washers,
and certain solvents. Clean the side surfaces
of the chain with a dry cloth. Do not brush
the rubber O-rings. Brushing will damage
them. Wipe dry and lubricate only with SAE
80 or 90 gear oil. Commercial chain lubri-
cants may contain solvents which could
damage the rubber O-rings.
The drive chain on this motorcycle is
equipped with small O-rings between
the link plates. These O-rings retain
grease inside the chain to improve its
ser v ice lif e. How ev er , special
precautions must be taken when
adjusting, lubricating, washing, and
replacing the chain.
73
Publicidad
Tabla de contenido
