Using The Unit - Stihl FB 131 Manual De Instrucciones

English

Using the Unit

Your bed redefiner is suitable for
recutting existing flowerbed edges to
restore their sharp contours. Redefining
produces a sharp angled furrow.
Always pull the power tool, do not
N
push it forward – work in the
direction shown by the arrow.
Preparations
WARNING
To reduce the risk of accidents or injury,
remove all obstacles and objects from
the work area.
Plan the best route for redefining.
N
Always hold and operate your
power tool on the left-hand side of
your body with the cutting
12
attachment to the rear. Maintain a
safe distance from the cutting
attachment at all times.
Adjusting Depth of Cut
2
A
To reduce the risk of accidents,
N
shut off the engine and wait until the
cutting attachment comes to a
standstill.
Loosen the wingnut (1)
N
counterclockwise.
Push wheel (2) upwards to increase
N
the depth of cut (A) or downwards to
reduce the depth of cut (A).
1
The depth of cut (A) depends on the
uneveness of the ground, your height
and normal working position. Therefore:
move the wheel (2) so that the
N
blade (3) touches the ground in the
normal working position.
Tighten down the wingnut
N
clockwise.
3
A
FB 131