Approved Power Tool Attachments - Stihl FB 131 Manual De Instrucciones

Redefining bed edges
1
The arrow (1) on the deflector indicates
the direction of operation.
The deflector is set at the factory with its
open side facing away from the
operator. This ensures that cuttings and
other debris are directed away from the
power tool and operator.
Starting the Engine
N
Start the cut at no less than half
N
throttle and continue cutting at full
throttle.
FB 131
Hold and guide your power tool so
N
that the blade is vertical.
Cut steadily so that the engine is not
N
lugged down – do not apply force.
Operate at no more than a normal
N
walking pace.
Do not push the blade into the
N
ground.
Always pull the power tool, do not
N
push it forward.
WARNING
Always hold and operate your power tool
on the left-hand side of your body with
the cutting attachment to the rear.
Maintain a safe distance from the cutting
attachment at all times.
Cut at a steady pace to avoid having
N
to make several passes.
1
Use the gunning sight (1) to line the
N
blade up with the edge of the bed.
Approved Power Tool
Attachments
The following STIHL attachments may
be mounted to the basic power tool:
Interchangeable
Attachment Application
BF Cultivator with pick
tines
HL 145° Long reach hedge
trimmer
HT Pole pruner
KB (4601) Bristle brush
KW (4601) PowerSweep
English
13